The BASIC* cut-off wheel for stainless steel can be used to cut metal sheets, profiles, pipes, rods with small diameters and solid material. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The 1.0 mm thick cut-off wheels are particularly suitable for quick, comfortable and low-burr cutting.
The BASIC* cut-off wheel for stainless steel can be used to cut metal sheets, profiles, pipes, rods with small diameters and solid material. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The 1.0 mm thick cut-off wheels are particularly suitable for quick, comfortable and low-burr cutting.
The BASIC* cut-off wheel for stainless steel can be used to cut metal sheets, profiles, pipes, rods with small diameters and solid material. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The 1.0 mm thick cut-off wheels are particularly suitable for quick, comfortable and low-burr cutting.
The BASIC* 2-in-1 flap disc offers good specific removal. Thanks to a new upgrade, the BASIC* flap disc achieves an unprecedented lifetime and 30% more power. The TYROLIT 2in1 flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels.